Dual Moving Coil design, featuring independent coils for both left and right channels, provides outstanding channel separation

The coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion

The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws – no nuts required

Features low mass nude elliptical stylus and aluminum cantilever

A neodymium magnet and pure iron yoke provide increased magnetic energy

Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction

Pure copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer

Technical Specifications

• Frequency Response 20-30,000 Hz
• Channel Separation 25 dB (1 kHz)
• Vertical Tracking Angle 20°
• Vertical Tracking Force 1.8-2.2 g (2.0 g standard)
• Stylus Construction Nude square shank
• Recommended Load Impedance Min. 100 ohms (when head amplifier is connected)
• Coil Impedance 12 ohms (1 kHz)
• DC Resistance 12 ohms
• Coil Inductance 25 mH (1 kHz)
• Output Voltage 0.35 mV (at 1 kHz, 5 cm/sec)
• Output Channel Balance 1.5 dB (1 kHz)
• Stylus Shape Elliptical nude
• Cantilever Aluminum pipe
• Static Compliance 20 x 10-6 cm/dyne
• Dynamic Compliance 9 x 10-6 cm/dyne (100 Hz)
• Mounting Half-inch
• Cartridge Weight 7.6 g
• Dimensions 17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.7 mm (1.01") D
• Accessories Included Non-magnetic screwdriver; 2 washers; cartridge installation screws (5 mm × 2, 8 mm × 2, 10 mm x 2, 12 mm x 2); plastic protector; brush
• Body Material Aluminum
• Model AT-OC9XEN
• Mounting Feature Half-inch mount
• Stylus Curvature Radius 0.3 x 0.7 mil
• Stylus Size Nude square shank
• Terminal Pins Brass
• Type Dual Moving Coil
• Weight 7.6 g (0.3 oz)
• Wire Used for Coil PCOCC